This week we're building the new Benchcrafted Classic Workbench, both in the virtual world, and in reality.
For several years we've been keen on designing a more approachable bench for new enthusiasts, or those who prefer the raw simplicity of a smaller, stripped down bench. We also wanted to produce something around our Classic Leg Vise, which deserves a bench of its own!
Continuing on the design and functional aesthetic of the Classic Leg Vise, this bench will strongly echo the workbenches from the late 19th and early 20th century French vocational schools, colonial territories, and those offered by the La Forge Royale company.
For those with a Split Top Roubo, the Classic will make an excellent, economical second bench.
The bench features only one vise for now. The Classic Leg Vise with Crisscross Solo. To round out the workholding, a planing stop and holdfasts are used for face work.
The bench uses only one type of joint. The easy to make half-lap mortise and tenon. We use this joint during the French Oak Roubo Project to joint the rails to the legs, with a single 5/8" drawbored peg. The top of this bench is joined to the base with the same joint.
This won't be a knock-down bench, so the hardware cost will be minimal. We're trying our hardest to design this bench to be affordable, easy to build, and perform to a high standard.
